PJ1 Blue Label Chain Lube 13oz BIG CAN

• Lubricates pins, rollers, side plates, and sprocket
• Penetrates deep into chain
• Reduces chain stretch and the requirement for frequent adjustments
• Has a “memory” to bounce back to absorb the shock that other chain lubricants can’t
• Protects chain against the elements
• Clear Formula won’t fling off

Step 1: To ensure proper adhesion clean all other oils, greases or lubes off the chain before application. Pre-use can storage should be at room temperature for best results

Step 2: Make sure engine is not running and transmission is in neutral

Step 3: Shake can well. Spin the wheel counterclockwise slowly by hand keeping fingers and clothing clear of moving parts. Apply chain lube to the lower inside “loop” of the chain on top of both edges of the side plates. Apply liberally for approximately 2 revolutions

Step 4: Wipe off excess application immediately